Intex CS8110 Manuale Utente Scaricare il pdf (Pagina 8)

(131) MODEL CS8110 SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013

131

SAVE THESE INSTRUCTIONS

English

Page 8

SETUP INSTRUCTIONS (continued)

1. Go directly to step 2 if your pool is empty. If your above-ground-pool is filled with water,

unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs

into the connectors, before installing the saltwater pool system.

2. Connect the adaptor A (1) to the electrolytic cell (4) outlet as shown in Drawing #1. Tighten

securely.

3. Disconnect the water return hose from the filter pump connection and connect it to the

adaptor A (1) on the Saltwater System with a hose clamp. (see Drawing #1)

4. Connect adaptor B (9) to the connector hose (8). Tighten securely. (see Drawing #1)

5. Connect adaptor B (9) to filter pump outlet (lower connection). Tighten securely.

6. Remove the black hat-like plugs that prevent water from flowing out of the pool. Now, return

the strainer grids to the strainer connectors.

Filter

Pump

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

Nessun commento

Intex CS8110 Manuale Utente Pagina 8